Parts of the Camper Roof Replacement
Camper roof replacement – Mobile homes are built as quickly as possible. According Automated Builder Magazine, it only takes about one to three weeks to build a complete home. This is the case, their roofs quickly installed. Architects, realizing speed building is extremely important, designed these structures “roofing system as simple as possible. Peeling the layers of a mobile home roof reveals only three simple structures.
Most mobile homes have shingles. These are made of a camper composite tar, with granules of sand embedded. There is no need for special shingles. Many campers use standard ceiling tiles, which are easily available at any building supply store. Many homes also use sheet camper roof replacement. These are thin metal panels, measuring approximately 4 meters wide and 12 or 14 meters long. These panels are easily installed, and the average homeowner can replace his roof with ease.
Below shingles or metal housing. This consists of wood panels measuring 4 meters to 8 meters. These panels are either made of plywood. OSB is made from recycled wood chips from the sawmill operations. The chips are mixed with glue and pressed into discs. Studies conducted at North Carolina State University reveals OSB is rot resistant, therefore recommended exterior building applications. OSB is a common building material, available on each timber yard. The sheathing is nailed to the rafters of the camper roof replacement.